Changes between Version 3 and Version 4 of RouterStationPro


Ignore:
Timestamp:
Jun 18, 2011, 11:16:36 PM (8 years ago)
Author:
amain
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • RouterStationPro

    v3 v4  
    88   * use swconfig to configure the manageable ethernet switch
    99
    10 NOTE: The device will boot default only with eth0 configured on 192.168.1.1. eth0 is connected to the '''WAN''' port. eth1 is connected to the 3 LAN ports and not enabled by default. The reason for booting up only eth0 is that the DebWrt rootfs images are generic images used for many devices. It is assumed that most devices have at least an eth0.
     10NOTE: The device will boot default only with '''eth0''' configured on '''192.168.1.1'''. eth0 is connected to the '''WAN''' port. eth1 is connected to the 3 LAN ports and not enabled by default. The reason for booting up only eth0 is that the DebWrt rootfs images are generic images used for many devices. It is assumed that most devices have at least an eth0.
    1111
    1212TIP: Use the serial console to see what's going on.