The RouterStation PRO is an impressive boards from Ubiquity. DebWrt runs very stable on it.

Firmware ar71xx-generic-ubnt-rspro-squashfs-factory.bin
Modules ar71xx-generic_UBNTRSPRO
RootFS mips
  • hostapd supported
  • use swconfig to configure the manageable ethernet switch

NOTE: The device will boot default only with eth0 configured on eth0 is connected to the WAN port. eth1 is connected to the 3 LAN ports and not enabled by default. The reason for booting up only eth0 is that the DebWrt rootfs images are generic images used for many devices. It is assumed that most devices have at least an eth0.

TIP: Use the serial console to see what's going on.

Last modified 11 years ago Last modified on Jun 18, 2011, 11:16:36 PM