Changes between Version 5 and Version 6 of LinksysE3000
- Timestamp:
- Sep 5, 2011, 12:52:47 AM (8 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
LinksysE3000
v5 v6 1 = L inksys E3000v1 =1 = LINKSYS E3000-V1 = 2 2 3 The linksys E3000v1 is now supported on debwrt, see [http://dev.debwrt.net/wiki/DebWrtInstallation/ here] for installation instructions. 4 ||='''Firmware''' =||[http://dl.dropbox.com/u/29682150/debwrt-firmware-e3000_v1-squashfs.bin debwrt-firmware-e3000_v1-squashfs.bin]|| 5 ||='''Modules''' =||[http://dl.dropbox.com/u/29682150/debwrt-modules-brcm4716-E3000v1-2.6.38.6-angel-2.0-1.tar.gz debwrt-modules-brcm4716-E3000v1-2.6.38.6-angel-2.0-1.tar.gz]|| 6 ||='''RootFS''' =||[http://www.debwrt.net/download/releases/latest/debwrt-rootfs-mipsel-2.0-1.tar.bz2 debwrt-rootfs-mipsel-2.0-1.tar.bz2]|| 7 8 * robocfg is used to configure the manageable switch. 9 * broadcom-wl utilities (wl, wlc & nas) are used to configure the wireless adapter. 3 The Linksys E3000-V1 is now supported on debwrt, at this time no images will be provided. You must compile for yourself using the plugin included below. 10 4 11 5 ** Please note that the broadcom gmac driver is not covered by a GPL compliant licence. Use of it in any way is done so at your own discretion. 6 7 See thread [http://www.debwrt.net/forum/hardware-group3/other-devices-forum6/support-for-e3000v1-thread8/ here] for support discussion. 12 8 13 9 = Compiling From Source = 14 10 15 11 Follow instructions [http://dev.debwrt.net/wiki/DebWrtSvn/ here] with a few modifications: 16 1. After checking out the DebWrt Build Environment, download and extract the attached archive to the plugins directory. [http://dl.dropbox.com/u/29682150/brcm4716-plugin- 20110614.tar.gz brcm4716-plugin-20110614.tar.gz]12 1. After checking out the DebWrt Build Environment, download and extract the attached archive to the plugins directory. [http://dl.dropbox.com/u/29682150/brcm4716-plugin-3.0.3-040911.tar.gz brcm4716-plugin-3.0.3-040911.tar.gz] 17 13 18 14 2. Follow the rest of the instructions as shown on the above link. … … 21 17 **General notes about the modified source files (the ones in the above archive) 22 18 - The new plugin facility automatically patches the DebWrt config files to create brcm4716 based device targets as well as select all required packages and options. 19 - Other brcm4716 based devices which are supported by the plugin include the Linksys WRT610N-V2 and the Asus RT-N16. 20 21 *AT THIS TIME ONLY THE RT-N16 HAS BEEN CONFIRMED TO BE WORKING, IF YOU HAVE SUCCESS ON EITHER THE WRT610N-V2 OR THE E3000-V1 PLEASE POST YOUR RESULTS IN THE FORUM*