Version 62 (modified by lars, 11 years ago) (diff)

describe network interface configuration


The RT-N16 is now user supported, see here for installation instructions.

Firmware debwrt-firmware-brcm4716-squashfs-3.2-021412.trx
Modules debwrt-modules-brcm4716-None-3.2.0-testing-2.1-1-021412.tar.gz
RootFS debwrt-rootfs-mipsel-2.0-1.tar.bz2

Please note that the broadcom gmac driver is not covered by a GPL compliant licence. Use of it in any way is done so at your own discretion.

See thread here for support discussion.

Compiling From Source

Follow instructions here with a few modifications:

  1. After checking out the DebWrt Build Environment, download and extract the attached archive to the plugins directory. *Plugin currently not available*
  1. Follow the rest of the instructions as shown on the above link.

General notes about the modified source files (the ones in the above archive)

  • The new plugin facility automatically patches the DebWrt config files to create brcm4716 based device targets as well as select all required packages and options.
  • Other brcm4716 based devices include the Linksys E3000v1 and the WRT610Nv2. This plugin should work for them as well but is untested.

Network Interfaces

The default network interface definition file suitable for RT-N16 can be found here. The following changes are probably necessary:

  • remove the lines marked as robocfg
  • enable the lines marked as asus rt-n16
  • disable the lines referring to /etc/firewall/ (this script is not available by default)
  • you will need to install the broadcom-wl package to use the wifi interface with encryption