Changes between Version 10 and Version 11 of AsusRT-N16


Ignore:
Timestamp:
May 24, 2011, 12:28:59 AM (8 years ago)
Author:
shinton@…
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • AsusRT-N16

    v10 v11  
    1 The RT-N16 is now supported for testing purposes
     1The RT-N16 is now supported for testing purposes, see below links for more info.
    22
    33||='''Firmware''' =||[http://dl.dropbox.com/u/29682150/debwrt-firmware-brcm4716-squashfs-bgmac-enabled.trx debwrt-firmware-brcm4716-squashfs-bgmac-enabled.trx] ||
     
    1010See thread [http://www.debwrt.net/forum/hardware-group3/other-devices-forum6/support-for-rt-n16-thread4.0/ here] for support discussion.
    1111
    12 ||='''Compiling From Source''' =||
     12= Compiling From Source =
    1313
    1414Follow instructions [http://dev.debwrt.net/wiki/DebWrtSvn/ here] with a few modifications:
    15 ||1. After checking out the DebWrt Build Environment, replace the Config, Openwrt & Config.in files with the ones in this archive: [http://dl.dropbox.com/u/29682150/brcm4716-debwrt-sourcefiles.tar.gz brcm4716-debwrt-sourcefiles.tar.gz]
    16 ||2. After running "make openwrt/menuconfig, run make openwrt/kernel_menuconfig and ensure that Device Drivers -> Sonics Silicon Backplane -> SSB Broadcom DMA library/64-bit SSB DMA cores support is set, then enable Device Drivers -> Network device support -> Ethernet (1000 Mbit) -> Broadcom SSB GMAC ethernet driver
    17 ||3. Follow the rest of instructions as shown on the above link, remember to run second stage install after flashing device.
     151. After checking out the DebWrt Build Environment, replace the Config, Openwrt & Config.in files with the ones in this archive: [http://dl.dropbox.com/u/29682150/brcm4716-debwrt-sourcefiles.tar.gz brcm4716-debwrt-sourcefiles.tar.gz]
     16
     172. After running "make openwrt/menuconfig, run make openwrt/kernel_menuconfig and ensure that Device Drivers -> Sonics Silicon Backplane -> SSB Broadcom DMA library/64-bit SSB DMA cores support is set, then enable Device Drivers -> Network device support -> Ethernet (1000 Mbit) -> Broadcom SSB GMAC ethernet driver
     18
     193. Follow the rest of instructions as shown on the above link, remember to run second stage install after flashing device.