Opened 12 years ago

Closed 12 years ago

Last modified 12 years ago

#41 closed defect (invalid)

about other AR71xx device. ethX can't link.

Reported by: sniperpr@… Owned by: amain
Priority: blocker Milestone: milestone:
Component: debian/packages Version: 2.0
Severity: Keywords:


i build RB433 kernel,use this site MIPS-ROOT.
eth0 and eth1 can't link.

DIR-825 same problem.


swconfig dev eth0 help
Failed to connect to the switch
dmesg | grep -i PHY
Determined physical RAM map:
User-defined physical RAM map:
eth0: connected to PHY at ag71xx-mdio:04 [uid=02430d80, driver=ICPlus IP175C]
ethtool -i eth1
driver: ag71xx
version: 0.5.35
bus-info: ag71xx.0
root@debwrt:/dev/shm# ethtool -i eth0
driver: ag71xx
version: 0.5.35
bus-info: ag71xx.1

Attachments (0)

Change History (3)

comment:1 Changed 12 years ago by anonymous

has dpkg -i swconfig and libnl-tiny

comment:2 Changed 12 years ago by amain

  • Resolution set to invalid
  • Status changed from new to closed

Setting to invalid: please make sure that ethernet and the eterhnet on these devices work on plain OpenWrt. I don't know the status of the switch driver and command line tool for these devices. If it works in OpenWrt, then it should work in DebWrt as well.

tip: do some tracing on how OpenWrt initializes the switch and configures the ethernet. Please add a wiki page on DebWrt when you found out how to get it working.

comment:3 Changed 12 years ago by sniperpr@…

thanks amain.

i try swconfig in the openwrt.
yes, swconfig not work.

but eth0 work.

why use debian_rootfs ethX not work??

Add Comment

Modify Ticket

as closed The owner will remain amain.
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.