Changeset 28


Ignore:
Timestamp:
Jun 26, 2010, 12:44:07 PM (9 years ago)
Author:
amain
Message:

Create empty rootfs for firmware image to prevent the firmware image to become to large because all modules are installed on rootfs

Location:
debwrt/trunk
Files:
2 edited

Legend:

Unmodified
Added
Removed
  • debwrt/trunk/Config.in

    r26 r28  
    594594     http://madwifi-project.org/
    595595
    596 config PACKAGE_kmod-b43
     596menuconfig PACKAGE_kmod-b43
    597597        bool "kmod-b43.................................. Broadcom 43xx wireless support"
    598598        default y
    599     help
    600       Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
    601       http://linuxwireless.org/en/users/Drivers/b43
     599        help
     600          Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
     601          http://linuxwireless.org/en/users/Drivers/b43
     602
     603        menu "Configuration"
     604                depends on PACKAGE_kmod-b43
     605
     606        choice
     607                prompt "b43 firmware version"
     608                default B43_EXPERIMENTAL
     609                help
     610                  This option allows you to select the version of the b43 firmware. DebWrt note:
     611                  Over the years this experimental version showed better results then the stable
     612                  version
     613
     614        config B43_STABLE
     615                bool "4.150.10.5 (stable)"
     616                help
     617                  Stable firmware for BCM43xx devices.
     618
     619                  If unsure, select this.
     620
     621        config B43_EXPERIMENTAL
     622                bool "4.178.10.4 (experimental)"
     623                help
     624                  Experimental firmware for BCM43xx devices.
     625
     626                  This firmware is not tested as much as the "stable" firmware.
     627
     628                  If unsure, select the "stable" firmware.
     629
     630        config B43_OPENFIRMWARE
     631                bool "Open FirmWare for WiFi networks"
     632                help
     633                  Opensource firmware for BCM43xx devices.
     634
     635                  Do _not_ select this, unless you know what you are doing.
     636                  The Opensource firmware is not suitable for embedded devices, yet.
     637                  It does not support QoS, which is bad for AccessPoints.
     638                  It does not support hardware crypto acceleration, which is a showstopper
     639                  for embedded devices with low CPU resources.
     640
     641                  If unsure, select the "stable" firmware.
     642
     643        endchoice
     644
     645        config B43_FW_SQUASH
     646                bool "Remove unnecessary firmware files"
     647                depends on !B43_OPENFIRMWARE
     648                default n
     649                help
     650                  This options allows you to remove unnecessary b43 firmware files
     651                  from the final rootfs image. This can reduce the rootfs size by
     652                  up to 200k.
     653
     654                  If unsure, say Y.
     655
     656        config B43_FW_SQUASH_COREREVS
     657                string "Core revisions to include"
     658                depends on B43_FW_SQUASH
     659                default "5,6,7,8,9,10,13,14,15"
     660                help
     661                  This is a comma seperated list of core revision numbers.
     662
     663                  Example (keep files for rev5 only):
     664                    5
     665
     666                  Example (keep files for rev5 and rev11):
     667                    5,11
     668
     669        config B43_FW_SQUASH_PHYTYPES
     670                string "PHY types to include"
     671                depends on B43_FW_SQUASH
     672                default "G,LP"
     673                help
     674                  This is a comma seperated list of PHY types:
     675                    A  => A-PHY
     676                    AG => Dual A-PHY G-PHY
     677                    G  => G-PHY
     678                    LP => LP-PHY
     679                    N  => N-PHY
     680
     681                  Example (keep files for G-PHY only):
     682                    G
     683
     684                  Example (keep files for G-PHY and N-PHY):
     685                    G,N
     686
     687        endmenu
    602688
    603689config PACKAGE_kmod-b43legacy
  • debwrt/trunk/Makefile

    r26 r28  
    2929include debian/debian.mk
    3030
    31 world: .config openwrt/build
     31world: .config openwrt/build openwrt/deliver
     32        @echo Make DebWrt completed
    3233        @echo REVISION=$$REVISION
    3334        @echo RELEASE=$$RELEASE
    3435        @echo DEBWRTVERSION=$$DEBWRTVERSION
    35         @echo Make DebWrt
    3636
    3737update-targets: openwrt/prepare
Note: See TracChangeset for help on using the changeset viewer.