BootSequence: boot.log

File boot.log, 21.3 KB (added by amain, 8 years ago)

Expample boot log using kexec

Line 
1+
2ADM6996FC PHY found on MAC0
3ADM6996FC PHY found on MAC1
4Ethernet eth0: MAC address 00:15:6d:c1:2a:ec
5IP: 192.168.1.20/255.255.255.0, Gateway: 0.0.0.0
6Default server: 192.168.1.42
7
8RedBoot(tm) bootstrap and debug environment [ROMRAM]
9Ubiquiti Networks certified release, version 0.9.9.07 - built 14:01:39, Apr 23 2009
10
11Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
12
13Board: Ubiquiti RouterStation
14RAM: 0x80000000-0x84000000, [0x8003ba50-0x83fe1000] available
15FLASH: 0xbf000000 - 0xc0000000, 256 blocks of 0x00010000 bytes each.
16== Executing boot script in 1.000 seconds - enter ^C to abort
17RedBoot> fis load -d -e kernel
18Trying LZMA decompression...
19Image loaded from 0x80060000-0x80396d20
20Image is not ELF, skipping ELF parsing...
21RedBoot> exec
22Now booting linux kernel:
23 Base address 0x80050000 Entry 0x80060000
24[    0.000000] Linux version 3.2.5 (amain@amain-laptop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #14 Wed Feb 15 15:04:11 CET 2012
25[    0.000000] bootconsole [early0] enabled
26[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
27[    0.000000] SoC: Atheros AR7161 rev 2
28[    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
29[    0.000000] Determined physical RAM map:
30[    0.000000]  memory: 04000000 @ 00000000 (usable)
31[    0.000000] arcs command line:  board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec
32[    0.000000] built in command line: rootfstype=squashfs,jffs2 noinitrd
33[    0.000000] final command line:  board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec rootfstype=squashfs,jffs2 noinitrd
34[    0.000000] Initrd not found or empty - disabling initrd
35[    0.000000] Zone PFN ranges:
36[    0.000000]   Normal   0x00000000 -> 0x00004000
37[    0.000000] Movable zone start PFN for each node
38[    0.000000] early_node_map[1] active PFN ranges
39[    0.000000]     0: 0x00000000 -> 0x00004000
40[    0.000000] Reserving 0MB of memory at 0MB for crashkernel
41[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
42[    0.000000] Kernel command line:  board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec rootfstype=squashfs,jffs2 noinitrd
43[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
44[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
45[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
46[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
47[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
48[    0.000000] Writing ErrCtl register=00000a02
49[    0.000000] Readback ErrCtl register=00000a02
50[    0.000000] Memory: 61144k/65536k available (2585k kernel code, 4392k reserved, 499k data, 204k init, 0k highmem)
51[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
52[    0.000000] NR_IRQS:48
53[    0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
54[    0.060000] pid_max: default: 32768 minimum: 301
55[    0.060000] Mount-cache hash table entries: 512
56[    0.070000] NET: Registered protocol family 16
57[    0.070000] MIPS: machine is Ubiquiti RouterStation
58[    0.370000] registering PCI controller with io_map_base unset
59[    2.680000] bio: create slab <bio-0> at 0
60[    2.690000] SCSI subsystem initialized
61[    2.690000] usbcore: registered new interface driver usbfs
62[    2.700000] usbcore: registered new interface driver hub
63[    2.700000] usbcore: registered new device driver usb
64[    2.710000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
65[    2.710000] pci 0000:00:12.0: BAR 0: set to [mem 0x10000000-0x1000ffff] (PCI address [0x10000000-0x1000ffff])
66[    2.720000] pci 0000:00:12.0: using irq 41 for pin 1
67[    2.720000] Switching to clocksource MIPS
68[    2.730000] NET: Registered protocol family 2
69[    2.730000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
70[    2.730000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
71[    2.740000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
72[    2.740000] TCP: Hash tables configured (established 2048 bind 2048)
73[    2.750000] TCP reno registered
74[    2.750000] UDP hash table entries: 256 (order: 0, 4096 bytes)
75[    2.760000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
76[    2.760000] NET: Registered protocol family 1
77[    2.790000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
78[    2.790000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
79[    2.800000] msgmni has been set to 119
80[    2.810000] io scheduler noop registered
81[    2.810000] io scheduler deadline registered (default)
82[    2.820000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
83[    2.840000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
84[    2.850000] console [ttyS0] enabled, bootconsole disabled
85[    2.850000] console [ttyS0] enabled, bootconsole disabled
86[    2.870000] loop: module loaded
87[    2.870000] Uniform Multi-Platform E-IDE driver
88[    2.880000] ide-gd driver 1.18
89[    2.880000] m25p80 spi0.0: found mx25l12805d, expected m25p80
90[    2.890000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
91[    2.890000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
92[    3.020000] Searching for RedBoot partition table in spi0.0 at offset 0xff0000
93[    3.150000] 5 RedBoot partitions found on MTD device spi0.0
94[    3.150000] Creating 5 MTD partitions on "spi0.0":
95[    3.160000] 0x000000000000-0x000000030000 : "RedBoot"
96[    3.170000] 0x000000030000-0x000000150000 : "kernel"
97[    3.170000] 0x000000150000-0x000000ff0000 : "rootfs"
98[    3.180000] mtd: partition "rootfs" set to be root filesystem
99[    3.180000] mtd: partition "rootfs_data" created automatically, ofs=430000, len=BC0000
100[    3.190000] 0x000000430000-0x000000ff0000 : "rootfs_data"
101[    3.200000] 0x000000ff0000-0x000000fff000 : "FIS directory"
102[    3.210000] 0x000000fff000-0x000001000000 : "RedBoot config"
103[    3.220000] ag71xx_mdio: probed
104[    3.220000] eth0: Atheros AG71xx at 0xb9000000, irq 4
105[    3.530000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:14 [uid=03026071, driver=Generic PHY]
106[    3.540000] eth1: Atheros AG71xx at 0xba000000, irq 5
107[    3.850000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
108[    3.850000] ath79-ehci ar71xx-ehci: Atheros built-in EHCI controller
109[    3.860000] ath79-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
110[    3.900000] ath79-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
111[    3.920000] ath79-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
112[    3.920000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
113[    3.930000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
114[    3.930000] usb usb1: Product: Atheros built-in EHCI controller
115[    3.940000] usb usb1: Manufacturer: Linux 3.2.5 ehci_hcd
116[    3.950000] usb usb1: SerialNumber: ar71xx-ehci
117[    3.950000] hub 1-0:1.0: USB hub found
118[    3.960000] hub 1-0:1.0: 2 ports detected
119[    3.960000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
120[    3.970000] ath79-ohci ath79-ohci: Atheros built-in OHCI controller
121[    3.970000] ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 2
122[    3.980000] ath79-ohci ath79-ohci: irq 14, io mem 0x1c000000
123[    4.050000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
124[    4.060000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
125[    4.060000] usb usb2: Product: Atheros built-in OHCI controller
126[    4.070000] usb usb2: Manufacturer: Linux 3.2.5 ohci_hcd
127[    4.070000] usb usb2: SerialNumber: ath79-ohci
128[    4.080000] hub 2-0:1.0: USB hub found
129[    4.080000] hub 2-0:1.0: 2 ports detected
130[    4.090000] uhci_hcd: USB Universal Host Controller Interface driver
131[    4.100000] Initializing USB Mass Storage driver...
132[    4.100000] usbcore: registered new interface driver usb-storage
133[    4.110000] USB Mass Storage support registered.
134[    4.110000] TCP westwood registered
135[    4.110000] NET: Registered protocol family 17
136[    4.120000] Bridge firewalling registered
137[    4.120000] 8021q: 802.1Q VLAN Support v1.8
138[    4.130000] console [netcon0] enabled
139[    4.130000] netconsole: network logging started
140[    4.150000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
141[    4.160000] Freeing unused kernel memory: 204k freed
142[    4.320000] usb 1-1: new high-speed USB device number 2 using ath79-ehci
143[    4.480000] usb 1-1: New USB device found, idVendor=1058, idProduct=070b
144[    4.490000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
145[    4.500000] usb 1-1: Product: My Passport 070B
146[    4.500000] usb 1-1: Manufacturer: Western Digital
147[    4.510000] usb 1-1: SerialNumber: 575847304142393434323837
148[    4.760000] scsi0 : usb-storage 1-1:1.0
149[    5.780000] scsi 0:0:0:0: Direct-Access     WD       My Passport 070B 1032 PQ: 0 ANSI: 4
150[    5.820000] sd 0:0:0:0: [sda] 623769600 512-byte logical blocks: (319 GB/297 GiB)
151[    5.840000] scsi 0:0:0:1: CD-ROM            WD       Virtual CD 070B  1032 PQ: 0 ANSI: 4
152[    5.870000] sd 0:0:0:0: [sda] Write Protect is off
153[    5.870000] sd 0:0:0:0: [sda] No Caching mode page present
154[    5.880000] sd 0:0:0:0: [sda] Assuming drive cache: write through
155[    5.940000] scsi 0:0:0:2: Enclosure         WD       SES Device       1032 PQ: 0 ANSI: 4
156[    5.960000] sd 0:0:0:0: [sda] No Caching mode page present
157[    5.960000] sd 0:0:0:0: [sda] Assuming drive cache: write through
158[    6.360000]  sda: sda1 sda2
159[    6.370000] sd 0:0:0:0: [sda] No Caching mode page present
160[    6.380000] sd 0:0:0:0: [sda] Assuming drive cache: write through
161[    6.380000] sd 0:0:0:0: [sda] Attached SCSI disk
162[ ---------- ] DebWrt boot
163[ ---------- ] Waiting for device with LABEL=DEBWRT_ROOT...found. Booting from /dev/sda1.
164[    7.970000] kjournald starting.  Commit interval 5 seconds
165[    7.980000] EXT3-fs (sda1): using internal journal
166[    7.990000] EXT3-fs (sda1): recovery complete
167[    7.990000] EXT3-fs (sda1): mounted filesystem with writeback data mode
168[ ---------- ] kexec kernel found. Kexec into it.
169[    8.480000] Starting new kernel
170[    8.480000] kexec_relocate_size = 5416
171[    8.490000] reboot_code_buffer = 83ba4000
172[    8.490000] kexec_start_address(entry point of new kernel) = 802d8a10
173[    8.500000] kexec_indirection_page = 83b41000
174[    8.500000] Copy kexec_relocate section from 802e4f58 to reboot_code_buffer: 83ba4000
175[    8.510000] kexec_args[0] (argc): 6
176[    8.510000] kexec_args[1] (argv): 83ba40e4
177[    8.520000] kexec_args[2] (env ):   (null)
178[    8.520000] kexec_args[3] (desc):   (null)
179[    8.530000] kexec_argv[0] = 83ba4529, kexec=1
180[    8.530000] kexec_argv[1] = 83ba4532, board=UBNT-RS
181[    8.540000] kexec_argv[2] = 83ba4540, console=ttyS0,115200
182[    8.540000] kexec_argv[3] = 83ba4555, ethaddr=00.15.6d.c1.2a.ec
183[    8.550000] kexec_argv[4] = 83ba456f, rootfstype=squashfs,jffs2
184[    8.550000] kexec_argv[5] = 83ba4589, noinitrd
185[    8.560000] Will call new kernel at 802d8a10
186[    8.560000] Bye ...
187[    0.000000] Linux version 3.2.5 (amain@amain-laptop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #13 Tue Feb 14 23:53:05 CET 2012
188[    0.000000] bootconsole [early0] enabled
189[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
190[    0.000000] SoC: Atheros AR7161 rev 2
191[    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
192[    0.000000] Determined physical RAM map:
193[    0.000000]  memory: 04000000 @ 00000000 (usable)
194[    0.000000] arcs command line:  kexec=1 board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec rootfstype=squashfs,jffs2 noinitrd
195[    0.000000] built in command line: rootfstype=squashfs,jffs2 noinitrd
196[    0.000000] final command line:  kexec=1 board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec rootfstype=squashfs,jffs2 noinitrd rootfstype=squashfs,jffs2 d
197[    0.000000] Initrd not found or empty - disabling initrd
198[    0.000000] Zone PFN ranges:
199[    0.000000]   Normal   0x00000000 -> 0x00004000
200[    0.000000] Movable zone start PFN for each node
201[    0.000000] early_node_map[1] active PFN ranges
202[    0.000000]     0: 0x00000000 -> 0x00004000
203[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
204[    0.000000] Kernel command line:  kexec=1 board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c1.2a.ec rootfstype=squashfs,jffs2 noinitrd rootfstype=squashfs,jffs2d
205[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
206[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
207[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
208[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
209[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
210[    0.000000] Writing ErrCtl register=00000a02
211[    0.000000] Readback ErrCtl register=00000a02
212[    0.000000] Memory: 61168k/65536k available (2572k kernel code, 4368k reserved, 495k data, 204k init, 0k highmem)
213[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
214[    0.000000] NR_IRQS:48
215[    0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
216[    0.060000] pid_max: default: 32768 minimum: 301
217[    0.060000] Mount-cache hash table entries: 512
218[    0.070000] NET: Registered protocol family 16
219[    0.070000] MIPS: machine is Ubiquiti RouterStation
220[    0.370000] registering PCI controller with io_map_base unset
221[    2.680000] bio: create slab <bio-0> at 0
222[    2.690000] SCSI subsystem initialized
223[    2.690000] usbcore: registered new interface driver usbfs
224[    2.700000] usbcore: registered new interface driver hub
225[    2.700000] usbcore: registered new device driver usb
226[    2.710000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
227[    2.710000] pci 0000:00:12.0: BAR 0: set to [mem 0x10000000-0x1000ffff] (PCI address [0x10000000-0x1000ffff])
228[    2.720000] pci 0000:00:12.0: using irq 41 for pin 1
229[    2.720000] Switching to clocksource MIPS
230[    2.730000] NET: Registered protocol family 2
231[    2.730000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
232[    2.730000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
233[    2.740000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
234[    2.740000] TCP: Hash tables configured (established 2048 bind 2048)
235[    2.750000] TCP reno registered
236[    2.750000] UDP hash table entries: 256 (order: 0, 4096 bytes)
237[    2.760000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
238[    2.760000] NET: Registered protocol family 1
239[    2.790000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
240[    2.790000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
241[    2.800000] msgmni has been set to 119
242[    2.810000] io scheduler noop registered
243[    2.810000] io scheduler deadline registered (default)
244[    2.820000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
245[    2.840000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
246[    2.850000] console [ttyS0] enabled, bootconsole disabled
247[    2.850000] console [ttyS0] enabled, bootconsole disabled
248[    2.870000] loop: module loaded
249[    2.870000] Uniform Multi-Platform E-IDE driver
250[    2.880000] ide-gd driver 1.18
251[    2.880000] m25p80 spi0.0: found mx25l12805d, expected m25p80
252[    2.890000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
253[    2.890000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
254[    3.020000] Searching for RedBoot partition table in spi0.0 at offset 0xff0000
255[    3.150000] 5 RedBoot partitions found on MTD device spi0.0
256[    3.150000] Creating 5 MTD partitions on "spi0.0":
257[    3.160000] 0x000000000000-0x000000030000 : "RedBoot"
258[    3.170000] 0x000000030000-0x000000150000 : "kernel"
259[    3.170000] 0x000000150000-0x000000ff0000 : "rootfs"
260[    3.180000] mtd: partition "rootfs" set to be root filesystem
261[    3.180000] mtd: partition "rootfs_data" created automatically, ofs=430000, len=BC0000
262[    3.190000] 0x000000430000-0x000000ff0000 : "rootfs_data"
263[    3.200000] 0x000000ff0000-0x000000fff000 : "FIS directory"
264[    3.210000] 0x000000fff000-0x000001000000 : "RedBoot config"
265[    3.220000] ag71xx_mdio: probed
266[    3.220000] eth0: Atheros AG71xx at 0xb9000000, irq 4
267[    3.530000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:14 [uid=03026071, driver=Generic PHY]
268[    3.540000] eth1: Atheros AG71xx at 0xba000000, irq 5
269[    3.850000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
270[    3.850000] ath79-ehci ar71xx-ehci: Atheros built-in EHCI controller
271[    3.860000] ath79-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
272[    3.900000] ath79-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
273[    3.920000] ath79-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
274[    3.920000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
275[    3.930000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
276[    3.930000] usb usb1: Product: Atheros built-in EHCI controller
277[    3.940000] usb usb1: Manufacturer: Linux 3.2.5 ehci_hcd
278[    3.950000] usb usb1: SerialNumber: ar71xx-ehci
279[    3.950000] hub 1-0:1.0: USB hub found
280[    3.960000] hub 1-0:1.0: 2 ports detected
281[    3.960000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
282[    3.970000] ath79-ohci ath79-ohci: Atheros built-in OHCI controller
283[    3.970000] ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 2
284[    3.980000] ath79-ohci ath79-ohci: irq 14, io mem 0x1c000000
285[    4.050000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
286[    4.060000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
287[    4.060000] usb usb2: Product: Atheros built-in OHCI controller
288[    4.070000] usb usb2: Manufacturer: Linux 3.2.5 ohci_hcd
289[    4.070000] usb usb2: SerialNumber: ath79-ohci
290[    4.080000] hub 2-0:1.0: USB hub found
291[    4.080000] hub 2-0:1.0: 2 ports detected
292[    4.090000] uhci_hcd: USB Universal Host Controller Interface driver
293[    4.100000] Initializing USB Mass Storage driver...
294[    4.100000] usbcore: registered new interface driver usb-storage
295[    4.110000] USB Mass Storage support registered.
296[    4.110000] TCP westwood registered
297[    4.110000] NET: Registered protocol family 17
298[    4.120000] Bridge firewalling registered
299[    4.120000] 8021q: 802.1Q VLAN Support v1.8
300[    4.130000] console [netcon0] enabled
301[    4.130000] netconsole: network logging started
302[    4.150000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
303[    4.160000] Freeing unused kernel memory: 204k freed
304[    4.320000] usb 1-1: new high-speed USB device number 2 using ath79-ehci
305[    4.480000] usb 1-1: New USB device found, idVendor=1058, idProduct=070b
306[    4.490000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
307[    4.500000] usb 1-1: Product: My Passport 070B
308[    4.500000] usb 1-1: Manufacturer: Western Digital
309[    4.500000] usb 1-1: SerialNumber: 575847304142393434323837
310[    4.760000] scsi0 : usb-storage 1-1:1.0
311[    5.790000] scsi 0:0:0:0: Direct-Access     WD       My Passport 070B 1032 PQ: 0 ANSI: 4
312[    5.800000] scsi 0:0:0:1: CD-ROM            WD       Virtual CD 070B  1032 PQ: 0 ANSI: 4
313[    5.810000] sd 0:0:0:0: [sda] 623769600 512-byte logical blocks: (319 GB/297 GiB)
314[    5.820000] sd 0:0:0:0: [sda] Write Protect is off
315[    5.830000] scsi 0:0:0:2: Enclosure         WD       SES Device       1032 PQ: 0 ANSI: 4
316[    5.830000] sd 0:0:0:0: [sda] No Caching mode page present
317[    5.840000] sd 0:0:0:0: [sda] Assuming drive cache: write through
318[    5.930000] sd 0:0:0:0: [sda] No Caching mode page present
319[    5.940000] sd 0:0:0:0: [sda] Assuming drive cache: write through
320[    5.990000]  sda: sda1 sda2
321[    6.100000] sd 0:0:0:0: [sda] No Caching mode page present
322[    6.110000] sd 0:0:0:0: [sda] Assuming drive cache: write through
323[    6.110000] sd 0:0:0:0: [sda] Attached SCSI disk
324[ ---------- ] DebWrt boot
325[ ---------- ] Waiting for device with LABEL=DEBWRT_ROOT...found. Booting from /dev/sda1.
326[    7.840000] kjournald starting.  Commit interval 5 seconds
327[    7.840000] EXT3-fs (sda1): using internal journal
328[    7.850000] EXT3-fs (sda1): recovery complete
329[    7.850000] EXT3-fs (sda1): mounted filesystem with writeback data mode
330[    8.030000] Algorithmics/MIPS FPU Emulator v1.5
331INIT: version 2.88 booting
332Using makefile-style concurrent boot in runlevel S.
333.udev/ already exists on the static /dev! ... (warning).
334Starting the hotplug events dispatcher: udevd.
335Synthesizing the initial hotplug events...done.
336Waiting for /dev to be fully populated...done.
337Setting parameters of disc: (none).
338Activating swap...[   10.870000] Adding 72288k swap on /dev/sda2.  Priority:-1 extents:1 across:72288k
339done.
340Cleaning up ifupdown....
341Setting up networking....
342Loading kernel modules...done.
343Activating lvm and md swap...done.
344Checking file systems...fsck from util-linux-ng 2.17.2
345done.
346Mounting local filesystems...done.
347Activating swapfile swap...done.
348Cleaning up temporary files....
349Configuring network interfaces...done.
350Cleaning up temporary files....
351Setting kernel variables ...done.
352INIT: Entering runlevel: 2
353Using makefile-style concurrent boot in runlevel 2.
354Starting Shell In A Box Daemon: shellinabox.
355[   13.530000] eth0: link up (100Mbps/Full duplex)
356Starting enhanced syslogd: rsyslogd.
357Starting periodic command scheduler: cron.
358Starting NTP server: ntpd.
359Starting internet superserver: inetd.
360Starting OpenBSD Secure Shell server: sshd[   14.720000] sshd (991): /proc/991/oom_adj is deprecated, please use /proc/991/oom_score_adj instead.
361.
362
363Debian GNU/Linux 6.0 debwrt ttyS0
364
365debwrt login: